Related Manuals for Ferno CCT-PX
Summary of Contents for Ferno CCT-PX
- Page 1 Ferno CCT-PX Critical Care Trolley * Photo showing CCT-PX configured with various available options Users’ Manual FERNO/MAN/1121/226-R3/UK Stock Code 2003-0158 Read this Manual and Retain for Future Reference...
- Page 2 ALL OTHER LOCATIONS For assistance or information, please contact your Ferno distributor. If you do not have a Ferno distributor, please contact your nearest Ferno Customer Services office. USA HEADQUARTERS Ferno-Washington, Inc., 70 Weil Way Wilmington, Ohio 45177-9371, U.S.A.
-
Page 3: Table Of Contents
Patient Harness and Straps ____________________ 27 Training ____________________________________ 6 Prepare to Deploy Cross-Strap Harness __________ 27 3 - About CCT-PX Critical Care Trolley __________________ 7 Deploying Cross-Strap Harness ________________ 28 Specification & Features _______________________ 7 Unfastening Cross-Strap Harness _______________ 29... -
Page 4: Safety Information
However, Ferno trolleys are designed to be compatible with Helpers can cause injury or be injured. Maintain control of either the Ferno range of Two-Part locking devices or competitors the trolley, operate the controls, and direct all helpers. equivalent locking devices, giving full compatibility and Improper maintenance can cause injury. -
Page 5: Safety And Instruction Labels
Safety and instruction labels place important information from The symbols defined below are used on the trolley and/or in this the user manual on the trolley. user manual. Ferno uses symbols recognised by the International Standards Organisation (ISO). Read and follow label instructions. Replace worn or damaged labels immediately. -
Page 6: Operator Skills And Training
Untrained operators can cause injury or be injured. Permit only trained personnel to operate the trolley. WARNING Improper use of the trolley can cause injury. Use the trolley only for the purpose described in this manual. * Photo showing CCT-PX baseline configuration FERNO/MAN/1121/226-R3/UK... -
Page 7: About Cct-Px Critical Care Trolley
• Detachable 3-stage telescoping IV pole For use on vehicles with a tail-lift or ramp, CCT-PX is compatible with Ferno's range of in-vehicle 2-part lock systems, ensuring the • Head-end document stowage net trolley is safely fixed to the vehicle floor. -
Page 8: Cct-Px Trolley Features
4.3 - E Size Cylinder Holders Medical devices CCT-PX includes 2 cylinder holder tubes designed to hold E size cylinders, but also include an adapter to allow a CD cylinder to The CCT-PX trolley is designed to allow equipment and medical be held in the tube. -
Page 9: Cd Size Cylinder Holder (Option)
4.5 - CD size cylinder holder (Option) Also available as an option on CCT-PX is a dedicated CD cylinder holder, which can also hold a Nitric cylinder, which is mounted to the baseplate of the trolley. -
Page 10: Oxylog 3000 Bracket Arm (Option)
Various other specialist storage brackets are available for a range of medical device and monitor mounts. Refer to the specific CCT-PX can be supplied with a metal plate at the head-end of the device mount for details of operation. trolley underneath the patient platform for attaching an Oxylog 3000 or Hamilton T1 mounting bracket for holding a ventilator. -
Page 11: 3-Stage Iv Pole (Option)
CCT-PX Features 4 - CCT-PX TROLLEY FEATURES 4.12 - 3 stage IV Pole (Option) 4.14 - Balloon Pump fixed platform (Option) The 3-stage IV pole attaches to the side-rail of the trolley and is telescopic in 3 stages, allowing it to be positioned and raised/... -
Page 12: Pacrac+ Equipment Table
PacRac+, attached using syringe drivers and IV fluid bags to the trolley. Dynamically tested Ferno's CEN compliant iNTRAXX bracket system, or temporarily to 10G, PacRac+ is certified and compliant to EN 1789, allowing strapped using the supplied straps and buckles. -
Page 13: Specialist Mount Options For Pacrac
Operating the Trolley Features 4 - CCT-PX TROLLEY FEATURES 4.18 - Storage Pouch for PacRac (Option) 4.17 - Specialist Mount Options for PacRac+ Also available for the PacRac+ equipment platform is a pouch system which attaches to the aside of the PacRac,allowing... -
Page 14: Cct-Px Operation
Red lever to raise/lower backrest 5.2 - Adjustment of leg position The CCT-PX has the facility to raise the patient's legs to various positions, including Trendelenburg, shock and knee contour. The leg platform has 2 sets of levers at the foot-end, located Knee contour position underneath the leg platform. -
Page 15: Adjustable Winged Headrest
5.8 - AB-PR Patient Mattress 5.6 - Adjustable Winged Headrest Ferno's AB-PR mattress incorporates a pressure-reducing inner An adjustable winged headrest is supplied with CCT-PX, foam, ensuring patient comfort and minimising the risk of providing support to the patient's head. The winged headrest pressure sores. -
Page 16: Wheel Brake
5.10 - Anti Static Wheel The trolley is fitted with wheel brakes on all 4 wheels to To prevent static build-up within the trolley whilst moving, CCT-PX is fitted with one anti-static wheel on one corner. The anti-static prevent it from moving during patient transfer. -
Page 17: Lateral-Folding Cotsides (Option)
The SX cotsides have 3 ratchet positions plus near vertical, near horizontal and fully down, 6 positions in total. The ratchet position angles from horizontal are 10 , 27.5 , 45 62.5 and 80 Ratcheting Moving the SX cotside to the required position Angles FERNO/MAN/1121/226-R3/UK... -
Page 18: Lowering/Raising Sx Cotsides
Squeeze the release lever Moving SX cotside whilst depressing lever Move the cotside fully down Bring SX cotside past horizontal Release lever and move SX cotside back up to SX cotside fully down required position FERNO/MAN/1121/226-R3/UK... -
Page 19: Sx Cotside Ratcheting Positions
SX cotsides ratchet position 4 - (62.5 SX cotsides in near-vertical position 1- (10 SX cotsides ratchet position 2 - (27.5 SX cotsides in near-horizontal position - (80 SX cotsides folded fully down SX cotsides ratchet position 3 - (45 FERNO/MAN/1121/226-R3/UK... -
Page 20: Using Sx Cotsides For Bariatric Transfers
Cotsides (Option) When in the horizontal position, the Surface Xtenders create an As an extension to the CCT-PX AB-PR mattress when using the extended patient surface to accommodate larger mass patients SX surface extender cotsides, padded sidepads are available to and are designed to support the extremities of the patient's body. -
Page 21: Head-End Storage Net (Option)
6 - OPERATING THE TROLLEY 5.21 - Head-End Storage Net (Option) A storage net is available for CCT-PX, which attaches to the trolley frame at the head-end below the backrest, allowing lightweight items such as documents and patient's belongings to be stowed whilst moving a patient outside of the ambulance. -
Page 22: Push Poles
5.23 - Push Poles 5.24 - Manoeuvring Handles (Option) CCT-PX is supplied with 2 push poles as standard, with the option Available as an option are side-fixing manoeuvring handles, which of an additional 2 more push poles as required. These lock into attach to the side of the trolley. -
Page 23: Split Scoop Extended Patient Surface Kit
5.25 - Attaching Split-Scoop Fixing Kit (Option) (cont..) Also available for use on POWERX and CCT-PX is the Split Scoop To attach the Scoop to the trolley, first ensure that SX cotsides or kit, which allows a standard Scoop EXL to be attached to the... - Page 24 Scoop. Two halves of Scoop laid on top of fixing brackets Ensure Scoop fins are under the holding plates FERNO/MAN/1121/226-R3/UK...
- Page 25 Starting with the foot-end brackets, start to rotate and raise the fixing pole lever such that the locking arm starts to protrudes through the hand-hold hole on the Scoop. Recheck to ensure Scoop still positioned such that hand-hold holes are in line with locking arms on foot- end bracket FERNO/MAN/1121/226-R3/UK...
- Page 26 Note that when using the Split-Scoop module the Scoop sides MUST be supported underneath when moving a patient on/off the trolley to ensure there is no imbalance of trolley and should always be carried out with the trolley in the lowest possible position. FERNO/MAN/1121/226-R3/UK...
-
Page 27: Preparing To Transport A Patient
Crash tested and CEN complaint as with all Ferno trolley patient 1. Always check condition and operation of trolley prior to using harness systems, the Cross-Strap system for POWERX and CCT- the trolley. -
Page 28: Deploying Cross-Strap Harness
Adjust length of strap to ensure Crossover straps are Repeat the same for the other Crossover strap securely holding the patient Buckle up the black leg strap and tighten accordingly. Patient is now ready to be transported. FERNO/MAN/1121/226-R3/UK... -
Page 29: Unfastening Cross-Strap Harness
If the straps have been adjusted longer, they can be clipped into the corresponding buckle on that side to avoid hanging down to the floor. Webbing Cross-strap extension attached onto to side buckle on one side showing extension functionality FERNO/MAN/1121/226-R3/UK... -
Page 30: Attaching Child Harness (Pedimate, Neomate)
PediMate, PediMate PLUS and Neomate top straps are attached to POWERX/CCT-PX in the same way as with any other trolley, where the top fixing straps are wrapped around the back of the... -
Page 31: Attaching 3Rd Party Child Harness (Acr Etc.)
POWERX and CCT-PX were not designed or tested for the attachment of third party harnesses. However there is available from Ferno a set of 4 fixing tangs to facilitate attachment of other child harnesses, such as the ACR harness, where the upper fixing... -
Page 32: Strap Attachment Points (Cross-Strap Harness)
BabyPod on a trolley. CCT-PX can be used to transport BabyPod unit. Attachment of BabyPod to CCT-PX is the same procedure as any other trolley, where the 2 fixing straps are fed around and under the belly of the trolley and then re-attached to the buckles on the opposite side of the BabyPod. -
Page 33: Preparing To Move The Trolley
Once the tail-lift is in the raised position, push the trolley into local manual handling protocols to winch the trolley into the the vehicle head-end first and secure in the Ferno 2 part lock vehicle. 8.3 - Loading the Trolley into a Vehicle... -
Page 34: Unloading A Trolley From A Vehicle With A Tail-Lift
8.7 - Fastening Trolley in a Vehicle of injury and damage if not checked first for compatibility. CCT-PX is compatible and has been tested with the Ferno However, Ferno trolleys are designed to be compatible with range of 2-part locks, including NMI and Unwin track locks and... -
Page 35: Maintenance
Ferno recommends you inspect the trolley for damage as with the least possible contact time, diluted as specified by you clean and disinfect it. See note regarding disinfectants to use. -
Page 36: Lubricating The Trolley
12.1 - Accessories 10.5 - Lubrication of Parts Ferno offers a full line of accessories and products for use with CCT- Disinfect and clean the trolley before applying lubricant. Use PX, many of which are outlined in this user manual. Always follow the lubricants designated below to lubricate the trolley. -
Page 37: Inspection
Are patient strap buckles free of visible damage and do they operate properly? Check that the ambulance has a properly installed, approved locking device and that the trolley locks in securely. ● ● Check the operation of the push/pull handles and push poles FERNO/MAN/1121/226-R3/UK... - Page 38 FERNO/MAN/1121/226-R3/UK...
-
Page 39: Servicing
It is recommended in addition to the regular inspection and cleaning interventions that Ferno CCT-PX trolley is serviced at least once every 12 months. Below is a service schedule sheet where servicing dates and activities can be recorded. Ferno UK offers a range of cost- effective servicing programmes, helping to keep your equipment in good condition and keeping whole life time costs to a minimum. - Page 40 FERNO/MAN/1121/226-R3/UK...