Table of Contents
Advertisement
7 - PREPARING TO TRANSPORT A PATIENT
7.6 - Unfastening Cross-Strap Harness
To unfasten the Cross-Strap harness, unbuckle each strap from
the side buckle by pressing the release button on the buckle.
Press release button to release Crossover strap
Next release the leg strap by squeezing the two release levers
on the buckle
Squeeze the two clips to open the leg strap buckle
The Cross-Strap harness has been designed such that when
there is no patient on the trolley and the Cross-Strap harness is
not being used, it does not hang down on the floor when the
straps are adjusted to shortest length.
If the straps have been adjusted longer, they can be clipped into
the corresponding buckle on that side to avoid hanging down
to the floor.
FERNO/MAN/1121/226-R3/UK
Preparing to Transport a Patient
7.7 - Cross-Strap Extensions for Larger
patients (Option)
Adjustable extension straps are also available for when
transporting larger bariatric, which extends the minimum length
of the straps and will adjust even longer to accommodate extreme
bariatric patients.
These extension straps should be connected onto the side
buckles (red extension strap into the side buckle with red strap,
blue to blue).
Webbing extension strap
Biosafe extension strap
Biosafe Cross-strap extension attached onto to side
buckle to extend length of cross-straps Extension
Webbing Cross-strap extension attached onto to side
buckle on one side showing extension functionality
Extension strap
attached to
buckle strap
29
Advertisement
Table of Contents
