3 - ABOUT CCT-PX CRITICAL CARE TROLLEY
3.1 - CCT-PX Specification & Features
The Ferno CCT-PX is a critical care trolley specifically designed for
the transfer of critically ill patients, requiring a range of medical
devices and equipment to be transported with the patient to
monitor and clinically support to the patient throughout the
transfer.
The CCT-PX is designed such that all medical equipment is
securely fixed to the trolley, ensuring the safety of the both patient
and medical staff when travelling in the ambulance.
For use on vehicles with a tail-lift or ramp, CCT-PX is compatible
with Ferno's range of in-vehicle 2-part lock systems, ensuring the
trolley is safely fixed to the vehicle floor.
Each trolley is bespoke-designed and individually built according
to the specific equipment requirements that are required to be
transported.
A range of features and options are available on CCT-PX, allowing
the trolley to be configured to differing needs, all of which are
covered within this user manual.
CCT-PX baseline configuration, as shown on the previous page,
includes the following features as standard:
•
Fixed frame lower frame body with 3 vertical fixing poles on
trolley base for attachment of any medical device utilising a
pole-clamp attachment, such as syringe drivers.
•
2 E size cylinder holders as standard, with adapter to allow
CD cylinders also to be carried
•
Olson 12-gang Power Distribution Unit
•
Adjustable winged headrest, PR foam AB material
•
Patient platform on trolley incorporating Anti-Bacterial
Pressure-Reducing (AB-PR) mattress, providing body
support and excellent infection control
•
Flat mattress surface ensures unhindered patient lateral
transfers
•
Utilising a clinically-developed anti-bacterial VELCRO® to fix
mattress to trolley, making removal for cleaning easy
•
Anti-bacterial moulded plastic parts & frame paint coating
•
Black/Orange webbing 'Cross-strap' patient harness straps,
quick and easy to deploy
•
Lateral-folding cotsides
•
Easy-to-operate lift-assisted backrest and leg position
platform (Trendelenburg, Shock & Knee Contour)
•
Wheel brakes on all 4 wheels, anti-static wheel on one
wheel
•
Detachable push-poles at foot-end for manoeuvring of
trolley, with option of 2 additional push-poles at head-end
•
Push-poles stored within trolley frame when not being
used, preventing loss or abuse
•
Bump wheels at all 4 corners to minimise damage from
knocks and scrapes along hospital corridors
•
MCF winch-link connection for assisted loading on ramps
FERNO/MAN/1121/226-R3/UK
Additional Options available:
•
Anti-Bacterial, wipe-clean Biosafe 'Cross-strap" patient
harness instead of webbing harness
•
2 Push poles at head-end additional to the 2 at foot-end
•
Surface eXtending (SX) ratcheting cotsides instead of
lateral-folding cotsides, giving extended-width patient
surface, load bearing when horizontal
•
Split-Scoop Bariatric Extended Patient Surface kit
•
Detachable 3-stage telescoping IV pole
•
Head-end document stowage net
•
Latching backrest monitor hook
•
Side-fixing manoeuvring handles
•
Dedicated CD/Nitric cylinder holder attached to base of
trolley
•
PacRac+ for holding medical equipment
•
Range of medical device brackets, fixed & swivel mount
•
Directional wheel locks at head-end
Dimensions
Length
Width
Trolley
Surface Xtenders open
Split-Scoop extender kit
Height
To underside of mattress
Wheels (Diameter)
*
Patient Platform Max SWL
*see note below
Trolley Weight (excluding mattress + harness)
*Dependant on configuration
• Patient platform total 250kg SWL to include PacRac (10kg) +
equipment (25kg), if fitted
• In addition 80kg of medical equipment can be mounted equally
spaced on the trolley base
• If foot-end Fixed platform for Balloon Pump is fitted, then 40kg on
trolley base and 40kg on foot-end platform
• Total Mass not to exceed 430 Kg (Patient+Equipment+Trolley)
550 lbs
250 kg
40 st
MAX PATIENT PLATFORM LOAD LIMIT
About CCT-PX
Imperial
Metric
77.56 in
1970 mm
22.4 in
570 mm
36.2 in
920 mm
37.2 in
945 mm
32.5 in
825 mm
6 in
150 mm
Imperial
Metric
40 stone
250 kg
78 kg*
Mm
7