Wheel Brake; Anti-Static Wheel; Directional Wheel Lock (Option) - Ferno CCT-PX User Manual

Operating the Trolley
5.9 - Wheel Brakes
The trolley is fitted with wheel brakes on all 4 wheels to
prevent it from moving during patient transfer.
To lock the wheel brake in place apply a downward force onto the
brake pedal until it fully locks in place. This will stop the wheel fork
from rotating and stop the wheel from moving.
Wheel brake disengaged, pedal raised
Wheel brake engaged, pedal points down
To unlock the wheel lock, push brake pedal back up until it is
horizontal again.
16
6 - OPERATING THE TROLLEY FEATURES
5.10 - Anti Static Wheel
To prevent static build-up within the trolley whilst moving, CCT-PX
is fitted with one anti-static wheel on one corner. The anti-static
wheel is recognisable by its rubberised finish.
Rubberised Anti Static wheel on one corner

5.11 - Directional Wheel Lock (Option)

Directional wheel lock option allows the wheel direction to be
locked in line with the trolley, to aid control when moving in a
straight line, such as along hospital corridors or when moving up
or down an incline, such as a vehicle ramp.
To engage the directional wheel lock, press down on the black
plunger. This will lower the wheel-lock pin, which will then
engage into the pin-slot located on the top of the wheel fork once
the trolley is moved in a forward direction, thereby locking the
wheel parallel in line with the trolley.
To disengage the directional wheel lock, Lift the black plunger
back up again. This will raise and disengage the pin, thereby
allowing the wheel to swivel again.
FERNO/MAN/1121/226-R3/UK