Pacrac+ Equipment Table; Attaching Equipment To Pacrac - Ferno CCT-PX User Manual

Operating the Trolley Features
4.15 - PacRac Equipment Table (Option)
The optional "PacRac+" gives an alternative method of attaching
various medical equipment such as defibrillators, monitors,
syringe drivers and IV fluid bags to the trolley. Dynamically tested
to 10G, PacRac+ is certified and compliant to EN 1789, allowing
the trolley to be transported in the ambulance with medical
equipment remaining attached to the PacRac+.
The PacRac+ is attached to the trolley using 2 extension poles
supplied with the PacRac+, which are fixed into the ends of the
trolley side interface rails at the foot-end of the trolley. When
PacRac is not in use the poles can be left on the trolley or can be
removed, according to preference..
Attaching the fixing poles
The PacRac+ equipment platform is attached to the trolley
by sliding it onto the fixing points on the top surface of these
extension poles.
To attach the PacRac, place it on top of the attached extension
poles in front of the fixing points, then slide the PacRac+ back
towards you to clip it in place. An audible click is heard when the
PacRac+ has been securely fixed into position. Push the PacRac
then away from you to ensure that it has indeed fixed in place.
Sliding the PacRac+ onto the fixing points
12
4 - CCT-PX TROLLEY FEATURES

4.16 - Attaching Equipment to PacRac+

Medical equipment such as monitors and defibrillators can be
permanently mounted to the top of the PacRac+, attached using
Ferno's CEN compliant iNTRAXX bracket system, or temporarily
strapped using the supplied straps and buckles.
Zoll X-series monitor with iNTRAXX mount to PacRac+
Zoll X-series monitor strapped to PacRac+
For more information on the PacRac+, please
also refer to the PacRac+ User Manual,
reference 00148-AU-V02, which is available
from Ferno.
FERNO/MAN/1121/226-R3/UK