Table of Contents
Advertisement
10.5 - Lubrication of Parts
Disinfect and clean the trolley before applying lubricant. Use
the lubricants designated below to lubricate the trolley. Do not
lubricate points marked with the "do not lubricate" symbol.
Your Ferno trolley will work efficiently and safely only when it is
lubricated. You MUST lubricate all moving and sliding parts after
every inspection or preventative maintenance programme, or if
there is inadequate lubrication for the moving parts to operate
easily and quietly.
In general terms, almost all sliding and moving parts may be
lubricated with light duty grease. A penetrating fluid lubrication
is used on some sliding parts of the trolley. However, when a
penetrating fluid lubricant is used, all excess MUST be wiped
away, to prevent any build-up of dust or grime which can clog up
working parts and impede movement.
IMPORTANT
Lubricating parts that should not be lubricated allows
dirt and foreign particles to collect on those parts,
resulting in damage. Lubricate only the numbered
reference points shown.
Do Not Lubricate
11 - PARTS AND SERVICE
11.1 UK Support
In the United Kingdom to order parts or for professional trolley
repair, contact Ferno UK - the only agent authorised by Ferno UK
to manage, service, and repair Ferno products.
Telephone Main Reception
Service Department
Service Email
Web
Improper parts and service can cause injury. Use
only Ferno parts and Ferno-approved service on
11.2 Worldwide
To order Ferno parts, and for professional trolley repair, contact
your Ferno distributor. Your distributor is the only agent authorised
by Ferno UK to manage, service, and repair Ferno products.
Modifying the Trolley can cause injury and damage.
Use the Trolley only as designed by Ferno.
36
Lubricate
+44 (0)1274 851999
+44 (0)1274 854511
services@ferno.co.uk
www.ferno.co.uk
WARNING
the trolley.
WARNING
12.1 - Accessories
Ferno offers a full line of accessories and products for use with CCT-
PX, many of which are outlined in this user manual. Always follow
the instructions packed with accessories. Keep the instructions
with this manual. Be aware of any special considerations (loading
heights, door widths, etc.) when using accessories.
Contact Ferno UK or your Ferno distributor for further product
information.
WARNING
Attaching improper items to the trolley can cause
injury. Use only Ferno-approved
items on the trolley.
Accessories available for use with CCT-PX:
•
SX cotside pads for enhanced bariatric tissue viability
(038288525)
•
Detachable headrest (0559-3116)
•
Detachable 3-stage telescoping IV pole folding (LAIV3SCL)
•
Detachable 3-stage telescoping IV pole non-folding
(LAIV3SCL(FIXED))
•
Head-end document stowage net (038288499)
•
Side-fixing manoeuvring handles (FWESLH)
•
PacRac+ medical equipment holder with straps and
iNTRAXX profiled top (FWEPR+IT)
•
PacRac fixing kit (required when using PacRac+ (0800-3182)
•
Split-Scoop Extreme Bariatric extended patient surface kit
( 009008250
•
Inflatable sidepads kit for use with Split-Scoop kit
(23271000802)
•
Trolley dust cover, elasticated, AB material (836353200/AB)
•
Patient protective shield (082-2097)
Parts and Service
FERNO/MAN/1121/226-R3/UK
Advertisement
Table of Contents
