Cct-Px Trolley Features; Attachment Of Equipment & Medical Devices; Pole-Clamp Vertical Poles; E Size Cylinder Holders - Ferno CCT-PX User Manual

CCT-PX Features
4.1 - Attachment of Equipment &
Medical devices
The CCT-PX trolley is designed to allow equipment and medical
devices to be safely attached to the trolley to ensure everything
stays in place in all scenarios, throughout the patient journey. The
following pages explains the various features and options.
4.2 - Pole-Clamp Vertical Fixing Poles
At the base of the trolley are vertical poles for attaching medical
devices that have a pole-clamp bracket incorporated into their
design, such as syringe drivers. Such equipment can be attached
simply by holding the device bracket against the pole and then
tighten the pole clamp fully. Once tightened recheck that the
device is indeed correctly attached.
A number of specialist brackets for a range of medical devices
are available from Ferno for attaching equipment via pole clamp.
Vertical poles for attachment of pole clamp devices
Example specialist bracket with pole clamp
8

4 - CCT-PX TROLLEY FEATURES

4.3 - E Size Cylinder Holders

CCT-PX includes 2 cylinder holder tubes designed to hold E size
cylinders, but also include an adapter to allow a CD cylinder to
be held in the tube. To store cylinder in a holder tube, simply
unfasten the top lid , place the cylinder inside the tube and lock
the lid back on.
E size Cylinder holder tubes

4.4 - E Cylinder Holder with CD Adapter

When using the E cylinder holder tubes to hold a CD cylinder,
the E-to-CD cylinder adapter kit needs to be first deployed. This
consists of a tube foam insert and an alternative top lid adapter
ring for holding the CD cylinder in place instead of an E cylinder.
First place the foam insert into the holder tubing and push it
down as far as it will go. Then place the CD cylinder in the tube
and attach the lid adapter ring, placing the ring over the top of the
CD cylinder and then attaching the two wires that are attached
to the ring to the sizes of E cylinder to the tube locking clasps,
making sure one of the wires is fed through the CD cylinder
handle and that the wires are tight. Use the supplied R clips to
ensure the wires are securely held in place. The CD adapter kit will
need removing if an E cylinder needs to be transported instead
of CD cylinder.
CD cylinder in upper E holder using CD adapter kit
FERNO/MAN/1121/226-R3/UK