Cd Size Cylinder Holder (Option); Storage Cabinet (Option); Bump Wheels - Ferno CCT-PX User Manual

4.4 - E Holder with CD Adapter (cont...)
CD cylinder in E cylinder held in place by top fixing
ring and fixing wires attached to side of cylinder tube

4.5 - CD size cylinder holder (Option)

Also available as an option on CCT-PX is a dedicated CD cylinder
holder, which can also hold a Nitric cylinder, which is mounted to
the baseplate of the trolley.
CD size Cylinder holder mounted to CCT-PX baseplate
To place a CD cylinder in the holder, loosen the 2 rubberised
straps, place the cylinder inside the holder.
Then tighten the straps and fix them by pushing the fixing pin
through the applicable hole in the strap (same principle as a belt
buckle)
It is important that the straps are fully tightened at all times
when a cylinder is located in the holder.
To remove the cylinder, loosen the holder straps and then remove
the cylinder from the holder.
WARNING
Ensure that grease never comes in contact with O2
cylinder or cylinder holder due to the potential explosive
risk that oil with oxygen under pressure can pose, in the
(unlikely) event of an incident and the O2 cylinder getting
ruptured.
FERNO/MAN/1121/226-R3/UK
4 - CCT-PX TROLLEY FEATURES

4.6 - Storage Cabinet (Option)

Also available as an option on CCT-PX is a locking cabinet,
mounted onto the end of trolley at foot-end, allowing medical
items, documents add personal possessions etc. to be safely
stored on the trolley whilst it is being transported. A set of keys is
supplied with the cabinet.
Locking storage cabinet

4.7 - Bump Wheels

Each corner casting where the push poles are fixed to the
trolley includes a white bump wheel, which safeguards
against knocks, bumps and scrapes.
Bump-wheel
CCT-PX Features
9