Table of Contents
Advertisement
5.25 - Attaching Split-Scoop Fixing Kit
(cont...)
Once the Scoop is positioned correctly, connect the two halves
of the Scoop together at the foot-end using one of the TSL
extension fixing poles, which have TSL locks at each end of the
pole. Then attach the head-end of the 2 Scoop halves using
the second TSL extension fixing pole.
Attaching 2 halves of Scoop together using extension
fixing pole
Connect Scoop halves at head- end with extension
fixing pole
Recheck to ensure Scoop still positioned such that
hand-hold holes are in line with locking arms on foot-
end bracket
FERNO/MAN/1121/226-R3/UK
6 - OPERATING THE TROLLEY
Operating the Trolley Features
5.25 - Attaching Split-Scoop Fixing Kit
(cont...)
Once the 2 half sections of the Scoop have been attached
together, the Scoop then needs to be locked onto the trolley
frame. Under each fixing bracket locking arm there is a red lever.
Locking arm red lever
Locking arm unlocked
Starting with the foot-end brackets, start to rotate and raise the
lever such that the locking arm starts to protrudes through the
hand-hold hole on the Scoop.
25
Advertisement
Table of Contents
