Table Of Contents - Viessmann Vitoligno 300-C Installation And Service Instructions Manual

Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
Commissioning steps
Inspection steps
Maintenance steps
•
1. Filling the heating system................................................................................................. 47
• • •
2. Checking all connections on the heating water side for leaks
•
3. Commissioning the heating system................................................................................. 48
•
4. Setting the supply times for fuel supply (with vacuum system)................................... 61
•
5. Matching the control unit to the heating system............................................................ 61
•
6. Setting the heating curves................................................................................................ 61
•
7. Starting the heating system.............................................................................................. 63
• •
8. Shutting down the heating system................................................................................... 64
9. Maintenance and cleaning work on the boiler................................................................. 64
•
10. Emptying the ash box........................................................................................................ 66
•
11. Cleaning the flue gas fan, Lambda probe and flue gas temperature sensor............... 67
•
12. Cleaning the flue gas collector chamber and heat exchanger...................................... 69
• • 13. Cleaning the combustion chamber and rotary grate...................................................... 69
•
14. Cleaning the ignition pipe................................................................................................. 72
• •
15. Cleaning the ash chamber and ash removal................................................................... 73
•
16. Cleaning the pellet hopper, vacuum module and rotary lock valve.............................. 74
• • •
17. Checking the expansion vessel and system pressure................................................... 75
• •
18. Checking gaskets............................................................................................................... 75
•
19. Lubricating drive chains and drive unit bearings........................................................... 75
• • •
20. Cleaning the flue system and checking it is working correctly..................................... 75
• • •
21. Emissions test.................................................................................................................... 76
•
22. Replacing the battery in the control unit......................................................................... 76
•
23. Confirming maintenance................................................................................................... 76
•
24. Instructing the system user.............................................................................................. 77
46
Page