Viessmann Vitoligno 300-C Installation And Service Instructions Manual page 44

Installation sequence
Pellet supply via vacuum system
Fitting left and top casing panels
1.
2.
Fig. 31
1. Fit left side panel.
2. Insert door hinges at the top and bottom left. Latch
door hinges into place in the brackets.
Close the door.
Note
The hinges are adjustable:
■ Disengage the damper fittings towards the front
and remove.
■ Adjust the hinges using the adjusting screws that
are now revealed.
Push the damper fittings back onto the hinge
■
until they engage.
44
(cont.)
3.
3. Position top panels, push forwards and secure
each one with 2 self-tapping screws.