Inserting Two Size Aa (R6) Batteries Into The Remote; Setting The Clock - Sony CMT-EP707 Operating Instructions Manual

[] Connect the FM antenna (except for
European model).
Extend the FM lead
antenna horizontally.
[] Connect the power cord to a wall outlet.
If the supplied adaptor oll _lle plug does not
fit your wall outlet, detach it from the plug
(only lbr models equipped with the
adaptor).
To turn oll the system, press I/_) (power).
Note
When carrying this system, make sure that all discs
are removed from the system.
When carrying this system
Perform the following procedure to protect
the CD mechanism.
t Make sure thzl the disc is removed from
the system.
2 Re-tie the strip 1hat was attached to the
CD tray when you purchased 1he system.
3 Press I/(_3 to turn offdle system.
4 Unplug _lle power cord.
Tip
When tile remote no longer operates the syslem,
replace both b_lteries with new ones.
Note
If you do ]lot use the remote for a long period of time,
remove tile batteries to avoid possible damage from
battery leakage.
1
Turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
3 Press CLOCK/TIMER SET on the
remote to select "SET CLK', then press
ENTER.
4
Press I<1<1or _ on the remote
repeatedly to set the hour.
5 Press ENTER.
6 Press I<1<1or _ on the remote
repeatedly to set the minute.
'7 Press ENTER.
The clock starts working.
If you make a mistake
Perlbrm from step I.
Note
Tile clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
3
Q)
€0
7 GB