Setting The Clock; Performing "Quick" Setup - Sony MHC-GN1300DA Operating Instructions Manual

Setting the clock

1
Press "/1 to turn on the system.
2
Press TIMER MENU.
The hour indication flashes in the
display.
If "PLAY SET?" flashes in the
V
display, press or
select "CLOCK SET?", then press
ENTER.
3
V v
Press or repeatedly to set
the hour.
4
Press ENTER.
The minute indication flashes in the
display.
5
V v
Press or repeatedly to set
the minute.
6
Press ENTER.
The clock starts functioning.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the
system is off
Press DISPLAY repeatedly until the clock
is displayed. The clock is displayed for a
few seconds.
v
repeatedly to
Performing "QUICK"
setup
Before using the system, you can make
the minimum basic adjustments in
"QUICK" setup.
If you do not want to perform "QUICK"
setup, press CLEAR in step 3. The guide
message will disappear from the TV
screen.
1
Turn on your TV and select the
video input.
2
Press "/1 to turn on the system.
Notes
• Make sure there is no disc in the disc tray.
Otherwise, the guide message does not
appear.
• Make sure that the headphone or microphone
is not connected. Otherwise, you cannot
perform "SPEAKER SETUP".
3
Press FUNCTION +/– repeatedly
to select "DVD" (or press DVD
on the unit).
The guide message appears at the
bottom of the TV screen.
4
Press ENTER without loading a
disc.
The "LANGUAGE SETUP" display
appears on the TV screen.
l
Continued
23
GB