Operating An Audio Device With This Unit; Deleting Registration Of All Paired Devices; Other Functions; Changing The Sound Settings - Sony MEX-BT3600 Operating Instructions Manual

G:\SONY\ME\845377S MEX- G:\SONY\ME\845377S MEX-
BT3600U\0129\3299319311\329931931MEXBT3600UCA\01US02CD-CA.fm BT3600U\0129\3299319311\329931931MEXBT3600UCA\01US02CD-CA.fm
00US+00COV-CA.book Page 17 Tuesday, January 29, 2008 1:29 PM
Operating an audio device with this
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
To Press
Play (6) (PAUSE)* on this unit.
(6) (PAUSE)* on this unit.
Pause
Skip tracks SEEK –/+ (
each track]
* Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Notes
• During audio device playback, information such as
track number/time, playback status, etc., of a
connected audio device is not displayed on this unit.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Deleting registration of all
paired devices
1
Press (OFF).
This unit is turned off.
2
If " " lights, press and hold
(BT) until "
" turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until "BT INIT" appears.
5
Press (SEEK) +.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while "INITIAL" is
flashing.

Other functions

Changing the sound settings

Adjusting the sound
characteristics
1
2
. / > ) [once for
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
EQ3
To select an equalizer type: "XPLOD,"
"VOCAL," "EDGE," "CRUISE," "SPACE,"
"GRAVITY," "CUSTOM" or "OFF" (
LOW*
To customize the equalizer curve.
BAL (Balance)
To adjust the balance between the right and left
speakers: "RIGHT-10" – "CENTER" (
"LEFT-10"
FAD (Fader)
To adjust the balance between the front and rear
speakers: "FRONT-10" – "CENTER" (
"REAR-10"
SUB (Subwoofer volume)
To adjust the subwoofer volume: "+10 dB" –
"0 dB" (
("ATT" is displayed at the lowest setting.)
AUX*
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 19).
Adjustable level: "+18 dB" – "0 dB" (
"–8 dB"
BTA*
To adjust the volume level for each connected
Bluetooth audio device. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: "+18 dB" – "0 dB" (
"–8 dB"
*1 When EQ3 is activated.
*2 When AUX source is activated.
*3 When Bluetooth audio source is activated
Press the select button repeatedly
until the desired item appears.
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
, MID* , HI*
1 1 1 (page 18)
) – "–10 dB"
z
2 (AUX level)
3
(page 16).
MEX-BT3600U
3-299-319-31 (1)
masterpage:Right masterpage:Right
).
z
) –
z
) –
z
) –
z
) –
z
17