Operating An Audio Device With This Unit; Deleting Registration Of All Paired Devices; Other Functions; Changing The Sound Settings - Sony MEX-BT2800 User Manual

E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm
00US+00COV-U.book Page 26 Wednesday, July 22, 2009 1:27 PM
2 Set your usual listening volume on the unit.
3 Press the select button repeatedly until "BTA"
appears, and rotate the volume control dial to
adjust the input level (–8 dB to +18 dB).
Operating an audio device with this
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
To Press
(6) (PAUSE)* on this unit.
Play
(6) (PAUSE)* on this unit.
Pause
Skip tracks SEEK –/+ (
each track]
* Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Notes
• During audio device playback, information such as
track number/time, playback status, etc., of a
connected audio device is not displayed on this unit.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Deleting registration of all
paired devices
1 Press and hold (SOURCE/OFF) for 1
second to turn off the power.
2
If " " lights, press and hold
(BT) until "
" turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until "BT INIT" appears.
5 Press (SEEK) +.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while "INITIAL" is
flashing.
26

Other functions

Changing the sound settings

Adjusting the sound
characteristics
1
2
The following items can be set (follow the page
reference for details):
. >
/ ) [once for
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
LOW*
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
SUB*
Adjusts the subwoofer volume.
AUX*
Adjusts the volume level for each connected
auxiliary equipment: "+18 dB" – "0 dB" – "–8
dB."
This setting negates the need to adjust the
volume level between sources.
BTA*
Adjusts the volume level for each connected
Bluetooth audio device: "+18 dB" – "0 dB" –
"–8 dB."
This setting negates the need to adjust the
volume level between sources (page 25).
*1 When EQ3 is activated.
*2 "ATT" is displayed at the lowest setting, and can be
*3 When AUX source is activated (page 29).
*4 When Bluetooth audio source is activated
MEX-BT2850MEX-BT2800MEX-BT2800
4-157-841-41(1)4-157-841-21(1)4-157-841-11(1)
Press the select button repeatedly
until the desired item appears.
Rotate the control dial to adjust the
selected item.
After 5 seconds, the setting is complete and
the display returns to normal reception/play
mode.
1 , MID* 1 , HI* 1 (page 27)
2 (Subwoofer volume)
3 (AUX level)
4 (BT-Audio level)
adjusted up to 21 steps.
(page 25).
masterpage:Left