Blade Installation - IBEX TS51C Assembly Manual

ASSEMBLY GUIDE
Figure 8 attached to lift arms
Lift the 3 point hitch unit up and install the top link pin. Adjust the length of the top link to
make the 3 point hitch close to straight up and down.
Figure 9 level the 3 point hitch unit with the top link

BLADE INSTALLATION

The 6 cutting blades that come with the mower are installed and changed with the blade tool.
The blade tool is stored on the top of the spring arm that connects the 3 point hitch to the
drum unit, shown here fully assembled.
2021-1.2 IBEX EQUIPMENT CO. 7