Attaching The Drum Unit To The 3 Point Hitch - IBEX TS51C Assembly Manual
Drum mower
Hide thumbs
Also See for TS51C:
- Assembly and quick start manual (22 pages) ,
- Assembly manual (23 pages) ,
- Assembly manual (20 pages)
Table of Contents
Advertisement
ASSEMBLY GUIDE
ATTACHING THE DRUM UNIT TO THE 3 POINT HITCH
Place the drum unit so that it is oriented as shown in Figure 12. Be sure the PTO spline shafts
face each other.
Figure 12 move the drum unit over to the three point hitch assembly like this
You will use the swivel tee subassembly shown below to connect two lift arms to the three
point hitch assembly.
Figure 13 swivel tee assembly
2021-1.2 IBEX EQUIPMENT CO.
9
Advertisement
Table of Contents
