Blade Installation - IBEX TS51C Assembly Manual

ASSEMBLY GUIDE
Attach the 3 point hitch to your tractor's lift arms. You will need linchpins to secure them (not
included).
Figure 7 3 point hitch attached to tractor's lift arms
Lift the 3 point hitch unit up and install the top link pin (Figure 2, A). Adjust the length of the
top link so that the 3 point hitch is plumb (straight up and down).
Figure 8 plumb the 3 point hitch unit using the top link

BLADE INSTALLATION

The six cutting blades that come with the mower are installed and changed with the blade
change tool. The blade change tool is stored on the top of the spring arm that connects the 3
point hitch to the drum unit, shown in Figure 9 fully assembled for identification.
2022-1.1 IBEX EQUIPMENT CO. 4