Codes Coding Levels; Call Up "Extended Settings; Overview "Extended Settings - Viessmann Vitotrol 350-C Installation And Service Instructions Manual

Codes
Coding levels
Not all menus are available at every setting level. This
is to avoid incorrect operation of the remote control
and other system components.
The system user can make adjustments in the stand-
ard menu. The "Extended settings" level is reserved
for heating contractors and is password protected.
Additional functions are available in this level. Here,
control parameters can be corrected for example.

Call up "Extended settings"

1. "Menu"
2. "Settings"
3. "Extended settings"
4. Tap on field "ABC" or "123" to change to the
required keyboard.

Overview "Extended settings"

Fig. 26 Page 1
Possible settings
"Configuration CAN modules"
"Default display settings"
"Configuration regulated circuits"
"Settings general"
"Actuator test"
"Change password"
"Default settings"
"Settings cascade"
"Settings cascade charging"
18
For main operating functions and displays:
Vitotrol 350-C operating instructions
For "Extended settings":
See from page 18
5. Enter password "1234".
Note
Password "1234" is set as default for the
Vitotrol 350-C. To change the password, see
page 20.
6. "OK" to confirm.
The "Extended settings" overview is displayed.
Fig. 27 Page 2
Description
From page 13
From page 15
From page 20
From page 19
From page 19
From page 20
From page 20
From page 27
From page 28