Abnormal Measurement State - EDAN VE-H100B User Manual

VE-H100B Veterinary Pulse Oximeter User Manual
Figure 3-5 Display SpO
Trend table:
Figure 3-6 Display SpO

3.2.3 Abnormal Measurement State

If the SpO sensor does not connect to the oximeter, it will give a
2
medium alarm, and display
If the SpO sensor falls off from the finger, it will give a medium
2
alarm, and display
In menu state or trend state, if there is no operation for 30 seconds,
the oximeter will return to measurement state.
In measurement state, if there is no measurement data and no
operation for 10 minutes, the oximeter will turn off automatically.
In Data transfer state, if the oximeter does not receive any
responsible signals for 10 minutes, it will turn off automatically.
and PR Trend Graph
2
and PR Trend Table
2
in the information area.
in the information area.
- 36 -