Measurement State - EDAN H100N User Manual

H100N Pulse Oximeter User Manual
Error 03
Error 04

3.2 Measurement State

3.2.1 Measurement Modes
There are two measurement modes which are waveform
mode and large numeric mode. By default, the
configuration is waveform mode.
Large Numeric Mode
The oximeter can display SpO
(%), PR, pulse rate unit (bpm), TEMP and temperature
unit (℃) in large numeric mode.
Indicates error for Temp board
Indicates error for main control
board
Figure 3-2 Large Numeric Mode
- 43 -
Oximeter Operation
, oxygen saturation unit
2