EDAN VE-H100B User Manual page 15

VE-H100B Veterinary Pulse Oximeter User Manual
28 There are no user-serviceable parts inside the oximeter,
the cover should only be removed by qualified service
personnel.
29 Do not spray, pour, spill liquid to the oximeter and its
accessories, connector, switch or opening in enclosure,
as this may damage the oximeter.
30 Before cleaning the oximeter or the sensor, make sure
that the equipment is switched off and disconnected
from the power line.
31 Reusable sensors must be moved to a new site at least
every 4 hours. Because individual skin condition affects
the ability of the skin to tolerate sensor placement. It
may be necessary to change the sensor site more
frequently with some patients. If skin integrity changes,
move the sensor to another site.
32 Do not use supplemental tape to adhere the clip and
sensor directly to the site, this can restrict blood flow
and cause inaccurate measurements.
33 Intravascular
measurements.
WARNING
dyes may
- 6 -
lead to inaccurate