EDAN VE-H100B User Manual page 23

VE-H100B Veterinary Pulse Oximeter User Manual
solvent for a long time may reduce the flexibility of the
scarfskin of the cable. Also, the connector should not
be dipped.
7 After monitoring, disinfect the probe according to the
instruction described in the user manual.
8 The materials with which the patient or any other
person can come into contact conform to the standard
of ISO10993.
9 The pictures and interfaces in this manual are for
reference only.
10 A functional tester cannot be used to assess the
accuracy of the oximeter probe or the oximeter.
11 The operating time of the Ni-MH rechargeable battery
package depends on the configuration and operation of
the pulse oximeter.
12 SpO waveform is not proportional to the pulse volume.
2
13 When the SpO
display "---".
14 Ensure the volume is properly set up. When the sound
pressure of audible alarm is below or equivalent to the
ambient noise, it may be difficult for the operator to
distinguish the audio alarm.
value is potentially incorrect, it will
2
- 14 -