EDAN VE-H100B User Manual page 14

VE-H100B Veterinary Pulse Oximeter User Manual
22 The device
immediately after power-on to confirm all the display
segments and icons are shown and the speaker
sounds a few seconds tone. If you do not hear the
POST pass tone, it indicates the alarm system does not
work well. Please do not use the oximeter and contact
qualified service personnel or your local EDAN
representative.
23 Before using it, the user should carefully read the
applicable user manual of sensor, including warnings,
cautions and instructions.
24 Do not use damaged sensor or extension cables, do
not use sensor with exposed optical components.
25 Tissue damage may be caused by incorrect application
or prolonged measurement duration using the sensor
(more than 2 hours). Inspect the sensor periodically
according to sensor user manual.
26 Do not immerse or wet the sensor, as this may damage
the sensor.
27 This equipment is not intended for home usage.
WARNING
enters POST
- 5 -
(Power-On-Self-Test)