EDAN VE-H100B User Manual page 82

VE-H100B Veterinary Pulse Oximeter User Manual
Disinfecting the Oximeter:
Before disinfecting the oximeter, make sure that the oximeter
is switched off and batteries are taken out.
To disinfect the oximeter, follow these steps:
1. Switch off the oximeter and take out the batteries.
2. Wipe the display screen using a soft, clean cloth dampened
with the disinfectant solution.
3. Wipe the exterior surface of the equipment using a soft cloth
dampened with the disinfectant solution.
4. Wipe off the disinfectant solution with a dry cloth after
disinfection if necessary.
5. Dry the oximeter for at least 30 minutes in a ventilated and
cool place.
Disinfecting the SpO
1. Wipe the surfaces of the sensor and cable using a soft cloth
dampened with the disinfection solution.
2. Wipe the patient contact area of the sensor with the cotton
swab dampened with the disinfection solution.
3. Wipe off the disinfection solution with a dry cloth after
disinfection.
WARNING
Sensor:
2
- 73 -