Yealink SIP-T27G User Manual page 144

https://arttel.ru/
User Guide for the SIP-T27G IP Phone
Note
134
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
phone in the system (for example, a phone in another office or conference room). You can park
an active call by pressing the Park soft key or call park key (if configured) on the phone. If the
call is parked successfully, there is a voice prompt confirming that the call was parked. You can
retrieve the parked call by pressing the Retrieve soft key or the retrieve park key (if configured).
If the parked call is not retrieved within a period of time defined by the system, the phone performing
call park will receive the call back.
Call park is not available on all servers. Contact your system administrator for more information.
The IP phone supports call park feature under the following modes:
FAC mode: park the call to the local extension or a desired extension through dialing the

park code.
Transfer mode: park the call to shared parking lot through performing a blind transfer to

a call park number (call park code).
To configure a call park key via phone user interface:
Press Menu->Features->DSS Keys.
1.
Select the desired line key.
2.
Press or , or the Switch soft key to select Key Event from the Type field.
3.
Press or , or the Switch soft key to select Call Park from the Key Type field.
4.
Press or , or the Switch soft key to select the desired line from the Account ID
5.
field.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
6.
(Optional.) Enter the call park code in the Value field.
7.
Press the Save soft key to accept the change or the Back soft key to cancel.
8.
If the call park code is already configured for the Park soft key, you don't need to configure it
when configuring a call park key.
To configure a retrieve park key via phone user interface:
Press Menu->Features->DSS Keys.
1.
Select the desired line key.
2.
Press or , or the Switch soft key to select Retrieve Park from the Type field.
3.
Press or , or the Switch soft key to select the desired line from the Account ID
4.
field.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
5.
(Optional.) Enter the park retrieve code in the Value field.
6.
Press the Save soft key to accept the change or the Back soft key to cancel.
7.