Using Blf Feature On The Ip Phone - Yealink SIP-T27G User Manual

https://arttel.ru/
User Guide for the SIP-T27G IP Phone
Note

Using BLF Feature on the IP Phone

Placing a Call to the Monitored User
Transferring a Call to the Monitored User
152
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
The original call is placed on hold.
Click Confirm to accept the change.
3.
Transfer Mode on DSS Key is also applicable to BLF list feature.
You can use the BLF key in the following ways:
Place a call to the monitored user.

Transfer a call to the monitored user.

Pick up an incoming call of the monitored user.

You can press a BLF key to dial out the monitored phone number when the monitored line is
idle.
To place a call to the monitored user when the IP phone is idle:
Press the BLF key.
1.
The IP phone dials out the phone number of the monitored user.
When there is already an active call on the IP phone, you can transfer the active call to the
monitored user by pressing the BLF key. The phone handles the active call differently depending
on the configuration of transfer mode via Dsskey with the BLF key (refer to
Mode on DSS Key). The transfer mode on DSS key has the following modes:
Blind Transfer

Attended Transfer

New Call

When the transfer mode on DSS key is set to Blind Transfer and there is already an active call
on the IP phone, you can do the following:
Configuring Transfer