Yealink SIP-T27G User Manual page 199

https://arttel.ru/
Note
Placing a Call on Hold
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
- Press to access the new call.
Press or the Answer soft key. Phone B stops ringing.
The incoming call is answered and the original call is placed on hold. The LED indicators of the
line key 1 on phone A will slowly flash green and phone B will slowly flash red indicating that
there is the held call on the line key 1. The LED indicators of the line key 2 on phone A will
illuminate solid green and phone B will illuminate solid red indicating that there is an active call
on the line key 2.
You can also answer the call on phone B. Do one of the following on phone B:
Press the line key 2. Phone A stops ringing.
-
Press or the Answer soft key. Phone A stops ringing.
-
The LED indicators of the line key 2 on phone A will illuminate solid red and phone B will
illuminate solid green indicating that there is an active call on the line key 2. Meanwhile, The LED
indicators of the line key 1 phone A will illuminate solid green and phone B will illuminate solid
red indicating that there is an active call on the line key 1.
If the number of incoming calls is greater than the configured line keys, the line keys will be used
by sequence circulation.
To place a call on public hold:
Press or the Hold soft key on phone A when party A and party C are talking.
1.
The line key LEDs on phone A slowly flash green and phone B slowly flash red when the
shared line call is placed on hold.
Advanced Phone Features
189