Yealink SIP-T27G User Manual page 174

https://arttel.ru/
User Guide for the SIP-T27G IP Phone
Recording a Call
Note
164
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
Select the desired DSS key.
2.
Press or , or the Switch soft key to select URL Record from the Type field.
3.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
4.
Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the Value field.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
6.
URL record key is configurable via web user interface at the path Dsskey->Line Key.
To record a call:
Press the record key or URL record key during a call.
2.
If the recording starts successfully, the recording icon will appear on the LCD screen and the
record key or URL record key LED will flash green.
Press the record key or URL record key again to stop recording.
3.
The recording icon disappears from the LCD screen and the record key or URL record key
LED goes out.
Recording status indicators you need to know:
Circumstance
A recording is started
A recording cannot be started
A recording cannot be stopped
The recording box is full
The call cannot be recorded
You can listen to the recordings stored on your server system. For example, you can dial an
access code to listen to the recordings.
The way in which you listen to the recordings may be different depending on the server. Contact
your system administrator for more information.
Icons on the LCD screen
appears on the LCD screen
appears for 1 second
appears for 1 second, then goes back
appears for 1 second
appears for 1 second