Yealink SIP-T27G User Manual page 37

https://arttel.ru/
Note
Wi-Fi Protected Setup (WPS)
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
The Wi-Fi icon appears on the status bar.
For more information on the password of the wireless network, contact your system
administrator.
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks. WPS can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply has to press WPS key on both the IP

phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a PIN generated randomly

by the IP phone on the gateway/router to connect.
Push Button Configuration (PBC)
To connect to the wireless network using PBC method:
Press Menu->Settings->Basic Settings->Wi-Fi.
1.
Press the WPS soft key, and then select WPS.
2.
The LCD screen prompts "WPS has been activated, connect in 120s!".
Long press the WPS key on your gateway/router.
3.
Once WPS setup has completed successfully, the icon
wireless network.
Personal Identification Number (PIN)
To connect to the wireless network using PIN method:
Press Menu->Settings->Basic Settings->Wi-Fi.
1.
Press the WPS soft key, and then select WPS-PIN.
2.
The LCD screen prompts "Please input below PIN code on your Wi-Fi router and press OK
to connect: xxx".
Getting Started
appears after the name of
27