Headset Use - Yealink SIP-T27G User Manual

https://arttel.ru/
User Guide for the SIP-T27G IP Phone

Headset Use

Note
Headset Mode Activation/Deactivation
Headset Prior
70
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
If you want to use a wired headset, physically connect your headset to the phone and activate
the headset mode for use. For more information on physically connecting a headset, refer to
Phone Installation on page 16.
If you want to use a wireless headset, insert the Bluetooth
back of the IP phone. For more information on using a Bluetooth headset, refer to
on page 72.
provides an introduction to wired headset use.
This section
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth headset can
be used.
To use headset, make sure the headset mode is enabled. Contact your system administrator for
more information.
To activate the headset mode:
Press on the phone.
1.
The HEADSET key LED illuminates solid green.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the Send soft key, the phone will then place a call
using the headset automatically. For more information on using the headset to place a call,
refer to Placing Calls on page 100.
To deactivate the headset mode:
Press again on the phone.
1.
The HEADSET key LED goes out.
You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
USB dongle into the USB port at the
Bluetooth Headset