Yealink SIP-T27G User Manual page 159

https://arttel.ru/
Note
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
To configure BLF ring type via phone user interface:
Press Menu->Settings->Basic Settings->Sound->BLF Ring Type.
1.
Press or to select the desired ring tone.
2.
(Optional.) Press
3.
Press the Save soft key to accept the change or the Back soft key to cancel.
4.
BLF ring type is configurable via web user interface at the path Features->Call Pickup.
When the monitored line receives an incoming call, the following occurs on your phone:
The phone plays a specific ring tone (if enabled).

The BLF key LED flashes red.

The caller ID appears on the LCD screen (if enabled).

In the following figure, the LCD screen shows an incoming call from 1077 on the monitored line.
You can do the following actions:
Press the Pick Up soft key to pick up the call.
-
Press the Send soft key to dial out the monitored phone number.
-
- Press the New Call soft key to place a new call.
Press the Cancel soft key to exit the screen.
-
If your phone is locked and the type of the phone lock is configured as Function Keys or All
Keys, you cannot use the Pick Up, Send, New Call and Cancel soft keys until unlocked. For more
information refer to Phone Lock
to adjust the ringer volume.
on page 43.
Advanced Phone Features
149