Vega MINITRAC 31 Operating Instructions Manual page 18

4 Mounting
18
Mass flow rate
The mass flow rate can be determined with the MINITRAC 31 in
conjunction with a flow meter.
Fig. 7: Mass flow rate measurement
1 Flow meter
2 MINITRAC 31
Point level detection
For level detection, the sensor is generally mounted horizontally at the
height of the requested limit level. Make sure that there are no struts
or reinforcements at this position in the vessel.
Direct the exit beam of the source container exactly towards the
measuring range of MINITRAC 31.
2
1
MINITRAC 31 • Foundation Fieldbus