Table of Contents
Advertisement
REMOVAL OF THE STOVE FROM THE PALLET
Before installing the stove, check that it has no damages.
The stove is secured on the pallet with two screws on the inside.
For Scan 80-2 and 80-4, open the door and dismount the screws.
For Scan 80-1 and 80-3, you can get access to the screws (1) from the rear of the stove.
A
NOTE: Do not touch the glass
NOTE: The stove must be taken off the pallet by dismounting the screws. Do not knock off the pallet, as this can damage the stove.
C ( 1:2 )
C
Scan 80
Stove:
DOOR (SELF-CLOSING)
Material:
The door is delivered without self-closing function.
Articlenumber:
C:\Working Folder\Designs\Scan 80\90580025.idw
Path:
NB: If you want a self-closing door, the spring can be tightened by turning the long screw (inside the spring) clockwise using a
Allen key (5 mm) and at the same time tightening the pointed screw at the bottom with a Allen key (2.5 mm).
Drawing
90580025B
number:
KEN
C
N/A
Area:
C ( 1 : 2 )
12
A ( 0,13 : 1 )
Afmontering fra Palle
Name:
Afmontering fra Palle
Scan 80
Stove:
Name:
Material:
Weight:
N/A
Area:
Weight:
N/A
Articlenumber:
C:\Working Folder\Designs\Scan 80\90580025B.idw
Path:
12-04-2021
Date:
Constructed/Changed by:
SCAN A/S
DK-5492 Vissenbjerg©
A
Remove the plate at the rear by inserting the tip of a
flat screwdriver into the little slot under the plate and
lift upwards, where after the upper edge of the plate can be
"tipped" out
Drawing
C ( 1:2 )
10-05-2017
Date:
number:
jwa
Constructed/Changed by:
B ( 1:2 )
N/A
SCAN A/S
N/A
Area:
DK-5492 Vissenbjerg©
Drawing
90580025B
number:
KEN
A
Drawing
90580025
12-04-2021
Date:
number:
Constructed/Changed by:
KEN
SCAN A/S
DK-5492 Vissenbjerg©
Bagklap fjernes ved at løfte op og "vip
Afmontering fra Palle
Scan 80
Stove:
Name:
Material:
Weight:
Articlenumber:
N/A
C:\Working Folder\Designs\Scan 80\90580025.idw
Path:
Pointed screw
Drawing
D ( 1 : 5 )
A
1
E
90580025B
Long screw
Area:
N/A
Dat
Con
Advertisement
Table of Contents
