Adjustment Of Primary- And Secondary Air - SCAN 80 Assembly And Instruction Manual

ADJUSTMENT OF PRIMARY- AND SECONDARY AIR

The primary air (1) is controlled by the lower damper (shown with a match and a small flame).
The secondary air (2) is controlled by the upper damper (shown with a big flame).
When firing a cold stove, pull both dampers to the right. The primary air damper will meet a stop (3).
Lift up the handle for the primary air damper and then pull it all the way to the right (4).
See our video about correct firing and adjustment of primary- and secondary air on www.scan-stoves.com or scan the QR-code
on next page.
ADJUSTMENT OF PRIMARY- AND SECONDARY AIR/WARM STOVE
When the stove is warm, adjust the primary- and secondary air dampers to 20/80 (5).
As long as the stove is warm, the primary air is only to be adjusted within the area before the stop (3).
Primary air: 0-20% at soft wood
Secondary air: 70-80%
NOTE: See page 28 "Mounting the UK - blocking and screw"
Dampers for primary-
and secondary air
Indstilling af Luftspjæld
Scan 80
Stove: Name:
Material:
Weight:
Articlenumber: N/A
C:\Working Folder\Designs\Scan 80\90580032.idw
Path:
/COLD STOVE
1
Damper for
primary air
Pull the primary air damper
3
to the right, until you reach
a stop.
N
18-05-2017
Date:
Constructed/Changed by:
Area: N/A SCAN A/S
DK-5492 Vissenbjerg©
N ( 0,40 : 1 )
2
Damper for
secondary air
When firing a cold stove, lift
4
the damper up over the stop
and all the way to the right.
When the stove is warm,
5
you can adjust the primary-
Drawing and secondary air to:
90580032
number:
jwa
20% primary air
80% secondary air
19