Technical Data And Dimensions - SCAN 80 Assembly And Instruction Manual

TECHNICAL DATA AND DIMENSIONS

Materials
Surface treatment
Max. log length
Weight Scan 80-1/2
Weight Scan 80-3/4
Flue conn. piece internal diameter
Flue conn. piece external diameter
Fresh air connection piece
external diameter
Approval type
* The stove can take logs up to 30 cm (horizontally placed).
** Intermittent operation in this context means normal use of
a wood-burning stove. In other words, you should let the fire
die down until only the embers are left before refuelling.
The Scan 80-series is produced in accordance with type
approval for the product, which also covers the product's
Assembly and Instruction Manual.
The Declaration of Performance (DoP) is available from
www.scan-stoves.com
Steel plate
Tested in accordance with EN 13240
Cast iron
CO Emission at 13% O
Galvanised sheet
CO Emission at 13% O
Vermiculite
Senotherm
Dust @ 13% O
25 cm*
No x @ 13% O
ca. 104,4 kg
Efficiency
ca. 110,0 kg
Energy efficiency index
144 mm
Energy efficiency class
148 mm
Nominal output
Chimney temperature EN 13240
100 mm
Temperature in flue conn. piece
Intermittent**
Amount of smoke
Negative pressure EN 13240
Recommended negative pressure
in flue connecting piece
Required combustion air supply
Fuel
Fuel consumption
Amount of fuel required to light
Amount of fuel, max.
(Reference to EN 13240: 2001/A2:2004)
EN test was carried out on the installation with an un-insulated
elbow pipe shown in the assembly manual for Scan 1008 on
page 11.
2
2
2
2
0,06 %
800 mg/Nm 3
<6 mg/Nm 3
81 mg/Nm 3
84 %
112
A+
6 kW
195 °C
233 °C
6,3 g/sec
12 Pa
17-20 Pa
19-25 m 3 /h
Wood
1,9 kg/h
1,5 kg
2,25 kg
5