Unpacking And Inspecting The Ln1000-V Rear Transition Module; Unpacking The Ln1000-V Rear Transition Module - Juniper LN1000-V Hardware Manual

CHAPTER 9
Unpacking and Inspecting the LN1000–V
Rear Transition Module
Unpacking the LN1000–V Rear Transition Module
Copyright © 2010, Juniper Networks, Inc.
Unpacking the LN1000–V Rear Transition Module on page 27
Before you begin unpacking the LN1000–V rear transition module, be sure you have a
utility knife to open the box.
NOTE: Be sure to retain all packaging materials in the event that you need to return
items for repair.
To unpack the LN1000–V rear transition module:
Open the outer box from the top.
1.
Remove the accessories from the box.
2.
The accessories are located between the outer box and the inner box that contains
the LN1000-V rear transition module. Accessories include an RJ-45-to-DB-9 adapter.
Remove the inner box that contains the LN1000-V rear transition module.
3.
Remove the LN1000-V rear transition module from the box and place it in the location
4.
you selected.
27