Installing The Ln1000-V Rear Transition Module - Juniper LN1000-V Hardware Manual

CHAPTER 10
Installing the LN1000–V Rear Transition
Module
Installing the LN1000–V Rear Transition Module
Copyright © 2010, Juniper Networks, Inc.
Installing the LN1000–V Rear Transition Module on page 29
Installing an SFP Transceiver in an LN1000–V RTM on page 30
Removing an SFP from an LN1000–V RTM on page 32
LN1000–V Rear Transition Module Front Panel Status LEDs on page 33
To install the LN1000-V rear transition module into a VITA 46.0-compliant chassis:
Verify that you have taken the necessary antistatic precautions.
1.
On the back of the VITA 46.0-compliant chassis, choose an appropriate slot for the
2.
rear transition module.
The LN1000-V rear transition module must be installed inline behind the designated
location where you plan to install the LN1000-V router. For example, if the LN1000-V
router is to be installed in slot 3, the rear transition module must be installed in the
back of the chassis in slot 3.
29