Ln1000-V Rear Transition Module Overview; Ln1000-V Rear Transition Module Description; Ln1000-V Rear Transition Module Features; Ln1000-V Rear Transition Module Backplane Connector - Juniper LN1000-V Hardware Manual

CHAPTER 8
LN1000–V Rear Transition Module
Overview
LN1000–V Rear Transition Module Description
LN1000–V Rear Transition Module Features
LN1000–V Rear Transition Module Backplane Connector
Copyright © 2010, Juniper Networks, Inc.
LN1000–V Rear Transition Module Description on page 23
LN1000–V Rear Transition Module Features on page 23
The LN1000-V rear transition module is a fully compatible, carrier-grade VITA
46.10-compliant I/O rear transition module for the LN1000-V Mobile Secure Router. The
6 rack unit (6RU) form factor, single-slot rear transition module is fully compliant with
the PICMG 2.0 Revision 3.0 specification.
The LN1000-V rear transition module requires an VITA 46.0-compliant chassis with a
midplane that accommodates front and rear board installations. The primary purpose
of this module is to provide rear access connections to the LN1000-V router in a test or
repair environment.
LN1000–V Rear Transition Module Backplane Connector on page 23
LN1000–V Rear Transition Module Console Ports on page 24
IPMI Shelf Manager on page 25
LN1000–V Rear Transition Module Ethernet Ports on page 25
LN1000–V Rear Transition Module Switch Settings on page 25
The connector on the LN1000-V rear transition module provides the ability to configure
the router. It also provides:
Console port access
IPMI signals
USB port access
Ethernet port access
23