Unpacking And Inspecting The Router; Chapter 2 Unpacking And Inspecting The Router; Before You Begin; Unpacking The Router - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - E120 AND E320 HARDWARE GUIDE REV 9-29-2010 Hardware Manual

CHAPTER 2

Unpacking and Inspecting the Router

Before You Begin

Unpacking the Router

Copyright © 2010, Juniper Networks, Inc.
This chapter reviews shipping contents and unpacking procedures for the router. It
contains the following sections:
Before You Begin on page 17
Unpacking the Router on page 17
Inspecting Router Components and Accessories on page 18
If You Detect or Suspect Damage on page 18
Contacting Juniper Networks on page 19
The Next Step on page 19
Before you begin unpacking the router, be sure you have the following tools:
A No. 2 Phillips screwdriver
A utility knife
A mechanical lift, or at least two people to assist in lifting
The router is delivered boxed, bolted, and strapped to a skid. For your convenience, we
recommend that you unpack the router in the location where you want to install it.
WARNING: Three people are required to install the router in a rack: two to
lift the system into position and one to screw it to the rack.
17