PIT es Set10u-5ns (AIDA) basic
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company's responsibility only to employ personnel who
Are familiar with the basic regulations concerning health and safety / accident prevention,
}
Have read and understood the information provided in the section entitled Safety
}
Have a good knowledge of the generic and specialist standards applicable to the specific
}
application.
Warranty and liability
All claims to warranty and liability will be rendered invalid if
The product was used contrary to the purpose for which it is intended,
}
Damage can be attributed to not having followed the guidelines in the manual,
}
Operating personnel are not suitably qualified,
}
Any type of modification has been made (e.g. exchanging components on the PCB
}
boards, soldering work etc.).
Disposal
In safety-related applications, please comply with the mission time T
}
characteristic data.
When decommissioning, please comply with local regulations regarding the disposal of
}
electronic devices (e.g. Electrical and Electronic Equipment Act).
For your safety
The unit meets all the necessary conditions for safe operation. However, please note the
following:
Check the function of the pushbutton before commissioning for the first time and then at
}
regular intervals (at least annually).
Operating Manual PIT es Set10u-5ns (AIDA) basic
1004863-EN-03
in the safety-related
M
| 9