Table of Contents
Advertisement
Technical specification of the provided accessories (battery, charger)
Technical specification of the S16 30 200 battery:
Technology
Plastic case
Voltage
Capacity
IP class
Compliance with standards
Temperature range of use
Condition of use
Security devices
Technical specifications of the S17 50 001 battery charger
The charger provided is able to work with any AC power value : voltage from 100V to 240V, frequency
50Hz or 60Hz.
The only adaptation needed is the AC cord.
Before ordering, please inform our services of the place of use: SCALEO Medical will provide the good
model of the AC cord.
Input AC voltage
Input AC frequency
Output DC voltage and current
Charging capacity
Maximum output current
Compliance with standards
Temperature range of use
Condition of use
Security devices
Usage
(1) The charge of NiMh batteries is a smart charge : a complete charge consists in a fast charge period, then a
slow charge period, then a compensation charge.
ABS PC
24V
2.6, 3, ou 3,3 Ah
IPX4 in use, IPXX in charge
EN ISO 60601-1
+10°C / +40°C
Indoor use only
- Protection against explosion risks: the casel is vented for removal of exhaust
gas
- Built-in electronic protection against surges on intensity, short-circuit ...
- Built-in electronic protection against overheating during charging
100-240VAC
50-60Hz
N.A. depends on the charge cycle (1)
NiMh batteries, 10 to 20 cells
0.9A
EN ISO 60601-1 , EN ISO 60601-1-2
-10°C / +40°C
Indoor use only
- Operating voltage LED
- Modulation of the charging current according to the state of charge of
the battery
- Automatic load sotp with visual alarm in case of overheating of the
battery during charging
As a « table » charger or attached to the wall (pins and screws
provided)
NiMh
Advertisement
Table of Contents
