Advertisement
69.
Attach Door Handles and Exterior Barrel
Bolt to doors. Handles are positioned on top
section of each door. Male Barrel Bolt piece will
be positioned on left door trim.
71.
On the inside, shim Window Insert evenly
in cavity. When properly positioned, secure
Window Insert to wall framing cavity with
4 - 2" screws.
Toll Free 1-888-658-1658
68.
The Interior Cane Bolt will be attached to Vertical
Door Flange. To position Cane Bolt correctly, attach to
flange first, close doors and mark hole to house Cane
Bolt Rod. Open doors and drill hole where previously
marked with 9/16" bit. Use hardware provided in each kit
to complete installation of all hardware.
70.
Locate Window Insert. Place Window Insert
into wall opening tight to wall siding.
72.
window trim with 2 - 2" screws per box.
Screw from inside of box into the center wall stud.
Attach second screw 2" below top screw.
www.outdoorlivingtoday.com
Page 26
Attach Flower Box below bottom of
sales@outdoorlivingtoday.com
Window Trim
Consider Caulking
inside of Window
Trim prior to
installing to
prevent possible
water leakage.
Advertisement
