Advertisement
Narrow Trim 77 1/2"
Angled Facia
57.
Position Front Facia (angle cut on ends) and Side Facia (square cut ends) in
corner. Line Facia up so square cut Facia is positioned between angled cut facia. Attach angled
facia to Plywood Roof Edge with 8 - 1 1/4" finishing nails per piece. Gap where facia boards come
together at peak will be covered in Step 61. Do a dry run using Fascia to help you correctly position
before attaching. Attach Side Facia to Rafter ends with 6 - 1 1/4" finishing nails.
58.
Attach remaining Angle and Side Facia as per Step 57. There are 2 Side Facia pieces per
side. Attach Pentagon Facia Plate at peak where Front Facia meet. Use 4 - 1 1/4" finishing nails
per piece to secure. Complete both ends.
Toll Free 1-888-658-1658
Square Cut Facia
www.outdoorlivingtoday.com
Page 22
56.
Attach Narrow Rear
Wall Trim
(1 - 1/2" x 2 1/2" x 77 1/2")
where rear wall panels come
together and leave a seam
with 6 - 1 1/4" finishing nails.
Align Trim so flush with bottom
Skirting.
Square cut Facia positioned
between Angled Facia
sales@outdoorlivingtoday.com
Advertisement
