Advertisement
91" across
46.
Roof Gussets are positioned on interior rafters. Prior to attaching, make sure Side Walls are
properly aligned. Have two helpers push the Sides at the top from the outside of shed until inside to inside
measurement 91" between Wall Plates. When correct, slide gusset up, use level to square gusset and attach
to rafters with 4 - 1 1/2" screws. Complete remaining Gusset. Pilot hole to prevent splitting.
47.
Attach Simpson Strong Ties to Top Wall framing and plates and also to the underside of the
rafters. Use 4 - 1 1/4" screws to secure. There are 4 Ties per side.
48.
Starting in front corner, locate 26 3/4" x 48" Plywood Roof Section and place on top of Roof
Rafters. Position so Plywood overhangs outside Rafter by 4". At bottom of Rafter, Roof Panel should
be flush with Rafter end.
Toll Free 1-888-658-1658
Flush with end of
Rafter. Evenly
positioned on
Interior Rafter
www.outdoorlivingtoday.com
Page 18
4" overhang
over Rafter.
sales@outdoorlivingtoday.com
Advertisement
