Advertisement
33.
Lift up a completed gable section and place on top of Rear Top Plate on wall. The rear gable
framing should sit flush with the inside of the top plate.
straight edge
34.
The gable should be centered sideways (left to right) on the top plate. Hint: use a straight edge
to check the angle of the gable framing and top plate. Both angles should line up. Adjust gable
accordingly. When positioned correctly, attach to walls and top plate with 8 - 2" screws. Screw from
the bottom of gable framing down into Top Plate and Wall.
35.
Complete positioning and attachment of front gable as per Step 33-34.
Toll Free 1-888-658-1658
Gable Framing
www.outdoorlivingtoday.com
Page 13
sales@outdoorlivingtoday.com
Advertisement
