Advertisement
Ridge Board
38.
Attach end of a 45 1/2" long Soffit Board flush to ends of outside
rafter with 2 - 1 1/4" screws per rafter end. Drill pilot hole in Soffit
ends to prevent splitting. Attach Ridge Board to opposite rafter end
aligning to bottom of rafter with 2 - 1 1/4" screws. Center Soffit on
Middle Rafter and secure with 2- 1 1/4" screws. Measure 45 1/2"from
outside rafter and secure Ridge Board to rafter with 2 - 1 1/4" screws.
Attach Middle Rafters together with 3 - 2 1/2" screws.
39.
Measure, position and attach interior Rafters as illustrated above.
Complete 2nd Rafter Section as per Step 37-38. Important - Make sure to Offset Metal
Ridge Board Connectors. See Step 44.
Toll Free 1-888-658-1658
56 1/2"l Rafters
4 1/2" wide
Soffits
45 1/2"
20 1/2"
91"
Centered on
Rafter
www.outdoorlivingtoday.com
Page 15
37.
Locate 6 - 1 1/2" x 3 1/2" x 56 1/2"
long Rafters, 2 - 1/2" x 4 1/2" x 45 1/2"l
Soffits and completed Ridge Board from
Step 36. Lay out as illustrated to the left
on a flat level surface.
Important - Ridge
Board must be
aligned to bottom
of rafter end.
45 1/2"
20 1/2"
23 1/2"
sales@outdoorlivingtoday.com
Ridge Board
Interior Rafter
Advertisement
