Advertisement
2x3 wall framing flush
with outside of plywood.
19.
Start positioning and securing wall panels around your floor. Attach wall studs together as per
Step 17. Be sure that rear wall panels fit between the side wall panels (sandwiched)
Toll Free 1-888-658-1658
18.
With the corner wall
attachment complete, position
a second rear wall panel in
place so bottom 2x3 wall
framing is sitting flush with
outside floor joists and
plywood floor. Wall siding
should overhang floor by
approximately 1/2"
When positioned correctly,
attach both rear wall panel
studs together as per Step 17.
www.outdoorlivingtoday.com
Page 8
17.
Position side solid wall into
place on plywood floor. Butt both
vertical wall studs of side and rear
walls together and attach with
3 - 2 1/2" screws. Screw at the
bottom, middle and top of stud to
secure properly.
Do Not Attach Walls To
Floor until Step 28.
sales@outdoorlivingtoday.com
Advertisement
