Advertisement
30.
Attach Side Top Plates (1 per side). The side top plates are angle cut down the Edge. Once
again, position top plate on wall plate so it is flush with inside of wall framing. Side plate should also
be flush with Front Top Plate. Secure with 4 - 2" screws per piece.
Rear Top Plates
31
. Position the Rear Top Plates on back wall to complete. Use 3 - 2" screws per piece.
Flashing
32.
Locate Gable 1/2 Walls for both
sides of the shed. Align framing and wall
siding lapp together. Screw center wall
framing of each piece together with
3 - 2 1/2" screws.
Note, prior to attaching, try each
combination of Gables for best fit.
Toll Free 1-888-658-1658
Notched at top
www.outdoorlivingtoday.com
Page 12
Male / Female Wall
Lapp Siding
sales@outdoorlivingtoday.com
Advertisement
