Advertisement
Hint: Use a chalk line
to mark location of
floor joists to
determine screw
placement.
B. Wall Section
Gable Walls (4)
(2/side)
Side Top Plates
(1 per side)
Angle cut on edge
Door Header
End Plates
(2)
Door Header
Door Jambs
Narrow Wall Panels (2)
12" wide
13.
Starting with Solid Wall Panels, carefully lay panel face down. Position and attach Wall
Plate to bottom of wall studs of each wall panel with 6 - 2 1/2" screws. Position so plates are flush
with framing. Note, some Bottom Wall Plates may already attached to some Solid Walls.
Toll Free 1-888-658-1658
12 .
With Plywood
positioned correctly on
floor framing, attach
with 1 1/4" screws.
Use screws every 16".
Exploded view of all parts necessary to complete
the Wall Section. Identify all parts prior to starting.
Bottom Wall Plate
www.outdoorlivingtoday.com
Page 6
Front and Rear Top
Plates (3 per side)
2 Angle cut on 1 end and 1
square cut.
Solid Wall
Panel (5)
Window Insert
(1)
Window Wall
Panel (1)
sales@outdoorlivingtoday.com
Advertisement
